One-piece cylindrical luminaire housing with integral cooling grooves and separate lens ring are precision-machined from 6082 billet aluminum alloy, then satin anodized. Lens ring fits flush to the housing and is sealed with one-piece closed cell silicone gasket. Borosilicate lens threads into the lens ring and is sealed with one-piece closed cell silicone gasket. Spun aluminum shade with anodized finish is supported by four formed aluminum struts welded to an attachment ring. Shade assembly mounts to the luminaire housing and is secured with four recessed setscrews. Housing fastens to the one-piece cast aluminum inverted taper bollard shaft with three recessed setscrews and sealed with one-piece closed cell silicone gasket. Electrical components mount to plate on the underside of the housing and are housed in the top of the shaft when the luminaire is installed. All hardware is stainless steel.

Low-voltage 12v transformer shall have high power factor rating greater than 93%. Total harmonic distortion shall be less than or equal to 20%. GU5.3 base porcelain socket with nickel-plated contacts shall be rated 10A/24V. MR-16 lamp is included.

Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24”. Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8” x 10” x 1-1/2” hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others). See pole data sheet for mounting details.