Wall mounted luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Heavily finned housing and doorframe are cast aluminum. Luminaire mounts to bracket with three socket head cap screws on each side of the bracket arm into mounting holes fitted with stainless steel helical thread inserts at the rear of the heavy cast housing. Hinged doorframe is sealed to the housing with one-piece closed cell neoprene gasket and secured with two captive socket head cap screws. Clear 0.47” thick tempered glass lens is machined to fit flush to the door and is mechanically retained and bonded to the door for a weather tight seal. Power cord exits luminaire at the rear of the housing into wire way on the bracket arm. Cord is sealed with a weather tight strain relief bushing at the luminaire. All hardware is stainless steel.
OPTICS
Vertical base up lamp positioned within specular facetted reflector provides asymmetric distribution.
ELECTRICAL
Ceramic metal halide core and coil ballast shall have class “H” (180°C) insulation system with a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
70
Ceramic Metal Halide
CDM70/T6/830
T6
G12
150
Ceramic Metal Halide
CDM150/T6/830
T6
G12
Lamp is included.
BRACKET
Fabricated steel mounting bracket consists of two steel plates welded to the wall plate. Wire way for power cable to luminaire is welded to the bracket assembly. Bracket mounts to wall surface over 3.5” or 4” octagon junction box with factory supplied wall anchors. Wall bracket is hot-dip galvanized prior to painting.
FINISH
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back