Luminaire housing, mounting plate, and lens ring are precision machined from 6082 aluminum, then satin anodized. Housing with integral cooling grooves is machined inside and out from 1.2” wall aluminum tubing. Lens ring with gasketed tempered glass lens fits flush to the housing and is secured with three recessed setscrews. Luminaire attaches to mounting plate with three recessed setscrews. Mounting plate mounts to ceiling with factory-supplied socket head lag screws and wall anchors over 3.5” or 4” octagon junction box.All hardware is stainless steel.

Base up compact fluorescent lamp uses a specular spun aluminum reflector to provide symmetrical distribution. Brushed aluminum ring provides cut-off and is offset 1.7” from the lens ring with spacers and stainless steel hardware. Optional matte glass lens is available upon request.

Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 98% and nominal ballast factor of 0.98. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to 0°F (-18°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and CSA recognized. GX24q-3 lamp socket is 75w-600v rated