Wall mounted indirect luminaire where contemporary styling is desired.
HOUSING
Luminaire housing with integral ballast assembly is cast from high-grade aluminum alloy with heavy cooling fins to enhance heat dissipation. Doorframe is one-piece cast aluminum and hinged for easy maintenance. Machined tempered glass lens is mechanically retained and bonded to the doorframe forming a flush fit to the exterior surface. Door assembly is sealed with closed cell silicone gasketing and secured by two captive socket head cap screws. Reflector sail with integral ribbing is cast aluminum and supported by two cast aluminum stanchions. Stanchion mounting holes in the housing are machined and fitted with stainless steel helical thread inserts. Fabricated steel slipfitter bolts to housing with four socket head bolts. Slipfitter mounts to 1.8” O.D. tenon and has built-in stop to limit insertion depth to 2.75”. Two offset rows of three recessed setscrews secure and level luminaire to the tenon. All hardware is stainless steel.
OPTICS
Horizontal double-ended lamp is housed in specular anodized aluminum reflector, laser cut for precise reproduction. Sail reflector material is profiled matte anodized aluminum and is mechanically retained and bonded to the adjustable sail. Sail is field adjustable to 0°, 15°, 30°, 45°, or 60° above horizontal and fixed in place with stainless steel locking screws. Precision-machined anodized aluminum adjustment knobs securely lock the sail in place.
ELECTRICAL
Ceramic metal halide
core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. RX7s porcelain sockets are 660w-600v, 5kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Ceramic Metal Halide
CDM150/TD/830
TD-7
RX7s
70
Ceramic Metal Halide
CDM70/TD/830
TD-6
RX7s
Lamp is included.
MOUNTING
Fabricated steel bracket assembly mounts over junction box and is secured to the wall in four places. Tenon is 1.8” O.D. and welded to square steel tubing with 0.118” wall thickness. Mounting bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
FINISH
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamps and ballasts shall carry the respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back