Wall mounted indirect
luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Luminaire housing
with integral ballast assembly is cast from high-grade aluminum alloy
with heavy cooling fins to enhance heat dissipation. Doorframe is
one-piece cast aluminum and hinged for easy maintenance. Clear tempered
glass lens is mechanically retained and bonded to the doorframe forming
a flush fit to the exterior surface. Door assembly is sealed with
closed cell silicone gasketing and secured by two captive socket head
cap screws. Reflector sail with integral ribbing is cast aluminum
and supported by two cast aluminum stanchions. Stanchion mounting
holes in the housing are machined and fitted with stainless steel
helical thread inserts. Fabricated steel slipfitter is attached to
housing with four socket head bolts. Slipfitter mounts to 2 3/8”
tenon and has built-in stop to limit insertion depth to 3.5”.
Two offset rows of three recessed setscrews secure and level luminaire
to the tenon. All hardware is stainless steel.
OPTICS
Horizontal lamp is housed in specular anodized aluminum reflector, laser cut
for precise reproduction. Sail reflector material is profiled matte
anodized aluminum and is mechanically retained and bonded to the adjustable
sail. Sail is field adjustable to 0°, 15°, 30°, 45°,
or 60° above horizontal and fixed in place with stainless steel
locking screws. Precision-machined anodized aluminum adjustment knobs
securely lock the sail in place.
ELECTRICAL
150w ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Assembled ballast with precision wound coils is vacuum impregnated with silica-filled polyester resin to re-enforce the electrical insulation, preclude moisture, inhibit noise, and dissipate heat. Ballast and starter (where applicable) combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter (where applicable) are UL and CSA recognized. RX7s porcelain sockets are 660w-600v, 5kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Ceramic Metal Halide
CDM150/TD/830
TD-7
RX7s
Lamp is included
MOUNTING
Fabricated steel bracket assembly mounts over junction box and
is secured to the wall in four places. Tenon is2 3/8” O.D.
and welded to square steel tubing with 0.157” wall thickness.
Mounting bracket is hot-dip galvanized with coating inside and out,
then lightly sanded prior to painting.
FINISH
Housing is cleaned
in an ultrasonic detergent bath prior to painting. Standard finish
is finely textured matte silver grey metallic. Special colors available
on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back