Wall mounted luminaire for outdoor applications where contemporary styling is desired.
HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap srews. All hardware is stainless steel.
OPTICS
Horizontal lamp is positioned within the formed aluminum reflector consisting of semi-specular and hammertone anodized aluminum sheet, laser cut for precise reproduction. Flat tempered glass lens is screen-printed with border around reflector opening.
ELECTRICAL
Metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter (where applicable) are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –40°F (-40°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Ceramic Metal
Halide
MHC150/U/M
ED-17
Medium
150
HPS
C150S55/M
ED-17
Medium
Lamp is included.
MOUNTING
Fabricated steel bracket arm is constructed from single formed steel plate and mounts over junction box to the surface in four places. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Mounting bracket is hot-dip galvanized, then lightly sanded prior to painting.
FINISH
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back