Pole mounted luminaire for outdoor applications where contemporary styling is desired.
HOUSING
One-piece domed housing is heavy cast aluminum. Hinged frameless tempered glass lens opens with single quarter-turn fastener for easy relamping. Lens is sealed to the housing with one-piece closed cell silicone gasketing. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Luminaire installs onto bracket mounting plate with four socket head cap srews. All hardware is stainless steel.
OPTICS
Horizontal lamp is positioned within the formed aluminum reflector consisting of semi-specular and hammertone anodized aluminum sheet, laser cut for precise reproduction. Flat tempered glass lens is screen-printed with border around reflector opening.
ELECTRICAL
Metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Mogul base porcelain socket is 1500w-600v, 4kV pulse rated. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –40°F (-40°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Mogul base porcelain socket is 1500w-600v, 4kV pulse rated. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
250
Ceramic Metal Halide
CMH250/U/830/R
T15
Mogul
150
Ceramic Metal
Halide
MHC150/U/M
ED-17
Medium
250
HPS
C250S50
ED-18
Mogul
150
HPS
C150S55/M
ED-17
Medium
Lamp is included.
POLE
Fabricated steel bracket arm is constructed from single formed steel plate and welded to the pole 3.5’ from the top. Square tubing welded to the underside of the bracket arm acts as a wire way for the luminaire power cable. Round and curved steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157”. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Pole and luminaire mounting bracket are hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080” spun aluminum and finished to match the pole. Nominal pole height of 23'.
FINISH
Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back