Surface mounted luminaire for interior and exterior applications where contemporary styling is desired.
HOUSING
Single 6060 aluminum alloy rear sidewall and front ledge mount to the square cast aluminum base with concealed hardware. Sidewall and ledge are 0.60” thick. Sidewall has two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic cubic lens with integral flange has single white acrylic panel bonded to the outer surface to align the lens assembly to the luminaire sidewall. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. Luminaire mounts to surface over single gang switch box with factory supplied hardware and wall anchors. All hardware is stainless steel.
OPTICS
Lamp is positioned within the matte acrylic cubic lens providing soft diffused illumination.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
13
Compact Fluorescent
CFQ13W/G24q
PL-C
G24q-1
18
Compact Fluorescent
CFTR18W/GX24q
PL-T
GX24q-2
Lamp is included.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back