Illuminating bollard for low-level pathway illumination where contemporary styling is desired.
HOUSING
Single 6060 aluminum alloy rear sidewall and front ledge mount to the square cast aluminum base with concealed hardware. Sidewall and ledge are 0.60” thick. Sidewall has two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic lens with integral flange mounts to the sidewall and base. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. All hardware is stainless steel.
OPTICS
Base down lamp is positioned within the matte acrylic cubic lens providing soft diffused illumination.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be
Class P and Outdoor Type 1 rated. Ballast shall have a minimum high
power factor rating of 98% and nominal ballast factor of 0.98. Total
harmonic distortion shall be less than 10%. Ballast shall be capable
of reliable starting to 0°F (-18°C) at nominal line voltage
and frequency of ±10%. Ballast shall be UL and CSA recognized. Lamp socket is 75w-600v rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
50
Compact Fluorescent
PL-L 50W
PL-L
2G11
Lamp is included.
MOUNTING
Bollard mounts to soil insert (included) with four M8 x 80 stainless steel socket head cap screws internal to the luminaire.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back