Surface mounted luminaire for interior and exterior applications where contemporary styling is desired.
HOUSING
Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing with 180-degree lens aperture is machined from tubing with nominal wall thickness of 0.60” and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to surface over single gang switch box with factory supplied hardware and wall anchors. All hardware is stainless steel.
OPTICS
Lamp is positioned within the matte acrylic cylindrical lens providing 180-degree distribution through housing aperture.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating greater than 90%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and cUL recognized. Lamp socket is 75w-600v rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
13
Compact Fluorescent
CFQ13W/G24q
PL-C
G24q-1
18
Compact Fluorescent
CFTR18W/GX24q
PL-T
GX24q-2
Lamp is included.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and optional transformer shall
carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back