Illuminating bollard for low-level pathway illumination where contemporary styling is desired.
HOUSING
Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing with 180-degree lens aperture is machined from tubing with nominal wall thickness of 0.60” and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to 0.197” thick wall extruded aluminum shaft with three concealed socket head cap screws. All hardware is stainless steel.
OPTICS
Base down lamp is positioned within the matte acrylic cylindrical lens providing 180-degree distribution through housing aperture.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
Bollard mounts to concrete foundation (by others) with three 3/8" x 8" x 1.5" anchors. See pole data sheet for mounting details.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and optional transformer shall
carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back