Illuminating bollard for low-level pathway illumination where contemporary styling is desired.
HOUSING
Cylindrical luminaire base, and top cap are precision machined from 6060 aluminum. Cylindrical housing with 180-degree lens aperture is 6060 aluminum tubing with nominal wall thickness of 0.197" and mounts to three concealed anchor rods. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. All hardware is stainless steel.
OPTICS
Vertical lamp is positioned within the matte acrylic cylindrical lens providing 180-degree distribution through housing aperture.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating greater than 90%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and cUL recognized. 2G11 lamp socket is 75w-600v rated.
Bollard mounts to anchor rods imbedded in concrete (by others). Four 3/8" x 10” x 2” hot-dip galvanized anchor rods secure luminaire. Optional soil insert available on request.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back