Illuminating bollard for low-level pathway illumination where contemporary styling is desired.
HOUSING
Luminaire consists of cylindrical housing, base, and top cap precision machined from 6060 aluminum. Cylindrical housing is machined from tubing with nominal wall thickness of 0.60” and mounts over the precision-machined luminaire base with three concealed socket head cap screws. Cylindrical matte acrylic lens mounts to the base inside the housing. Luminaire top cap mounts to the cylindrical housing with three captive socket head caps screws and provides access to luminaire for relamping. Luminaire base and top cap are grooved to accept one-piece silicone gasket to provide weather-tight seal to the lens. Luminaire mounts to 0.197” thick wall extruded aluminum shaft with three concealed socket head cap screws. All hardware is stainless steel.
OPTICS
Base down lamp is positioned within the matte acrylic cylindrical lens providing 360-degree distribution through housing aperture.
ELECTRICAL
Ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 porcelain socket is 660w-600v, 5kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
35
Ceramic Metal Halide
CDM35/T6/830
T6
G12
Lamp is included.
MOUNTING
Bollard mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws and washers. Anchor base assembly consists of four ½” x 17” x 3” hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others).
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back