Pole mounted luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Heavy-duty round domed housing and hinged doorframe are cast aluminum. Doorframe forms a reveal when closed and is secured with single captive socket head cap screw. Hollow core "D" profile silicone gasketing provides weather-tight seal. Hinged reflector plate, painted with high reflectance white paint, swings down allowing access to ballast components. Housing is fitted with stainless steel weather-tight strain relief bushing for the power cable exiting the rear of the housing. Bracket mounting holes on each side of the housing are fitted with stainless steel helical thread inserts. Pole top beacon is machined aluminum consisting of top cap supported by four aluminum support rods anchored to the luminaire base. All hardware is stainless steel.
OPTICS
Horizontal lamp is positioned within the formed aluminum reflector consisting of semi-specular and hammertone anodized aluminum sheet, laser cut for precise reproduction. Clear UV-resistant, acrylic drop lens is impact resistant. Beacon consists of vertical base down compact fluorescent lamp positioned within cylindrical matte acrylic lens. Optional colored lens is available for beacon.
ELECTRICAL
Metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter (where applicable) are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –40°F (-40°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
Fabricated steel bracket assembly with welded construction is composed of two steel plate sections strengthened by two gussets and cross support rods on opposing sides of the slipfitter. Square tubing welded to the inside of the plate sections provides additional structural support and serves as a concealed wireway for the luminaire power cable. Integral slipfitter has two rows of four recessed stainless steel setscrews for mounting to the pole. Top of slipfitter has extension for mounting the illuminating beacon. Two opposing decorative vertical straps at the base of the bracket assembly are attached to standoffs on the pole shaft with stainless steel hardware. Bracket is hot-dip galvanized inside and out, then lightly sanded prior to painting.
Round tapered steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.177”. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Two-piece base cover with tamper-proof fasteners is fabricated from 0.080” spun aluminum and finished to match the pole.Nominal pole height is 35'. See pole data sheet for mounting details.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic or black. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back