F A R I N O  R  Floodlight
 Project Name
 
Address
 
  City
 
  State
 
  ZIP
 

Dimensions           (right click to enlarge and/or print)


Type Model Watt Lamp Volt

Mounting

 Distribution Finish Option
  FN280 70
150		 MH - Metal Halide 2 - 120
7 - 277		 G - Ground Mount
DW - Direct to Wall
SF - Slipfitter		 S05 - 5° x 5° Symmetrical
S10 - 10° x 10° Symmetrical
S20 - 20° x 20° Symmetrical
S35 - 35° x 35° Symmetrical		   SG - Silver Grey
GG - Graphite Grey
BL - Black
CC - Custom Color		 SL - Spread Lens
LG - Lens Guard
YF - Yellow Filter
RF - Red Filter
BF - Blue Filter
GF - Green Filter
N - None
 
Ordering Information
Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
    Save     Add product     Send     Print   Back
 
Specifications
   
DESCRIPTION Low profile, high performance floodlight for applications where controlled distribution and contemporary styling are desired.
HOUSING Round soft-cornered optical housing and ballast enclosure are cast aluminum. Housings are mechanically joined by an articulating arm assembly, providing thermal isolation of lamp and ballast components. Cast aluminum doorframe with integral hinges attaches to housing with concealed hardware. Closed cell silicone gasketing creates a weather-tight seal. Doorframe is secured to housing with single captive socket head cap screw. Articulating arm assembly, consisting of components precision machined from high-grade aluminum alloy, allows ± 90° vertical and ± 60° horizontal aiming adjustment. Aiming angle is preset by hand tightening the precision-machined billet adjustment knob and locked in place with recessed hardware. Housing mounts to a stainless steel mounting plate and is retained with locator pins and setscrews. All hardware is stainless steel.
OPTICS

Tempered glass lens is ¼" thick with black screen-printed border. Lens is bonded with silicone to the cast aluminum doorframe.

Symmetrical Reflector: Round spun aluminum reflector shall have specular anodized finish. Matte black band is press-fit to the inner perimeter of the reflector and combined with an independent louver assembly consisting of two circular louvers and center cup for precise light control. Louver assembly is attached to the doorframe and allows access for relamping without the removal of any reflector or shielding elements. Available distributions are 5°, 10°, 20°, and 35°. Specify distribution and wattage.
ELECTRICAL Ceramic metal halide core and coil ballast with class "H" (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 porcelain socket is 660w-600v, 5kV pulse rated. Lamp is included.
LAMPING
Wattage     
Source

Lamp
Bulb
Base
Distribution

150
Ceramic
Metal Halide
CDM150/T6/830
T6
G12
Symmetrical

70
Ceramic
Metal Halide
CDM70/T6/830
T6
G12
Symmetrical
ACCESSORIES Optional accessories include lens guard, spread lens, and color filters. Color filters are available in red, blue, green, and yellow. All accessories are offset from the doorframe with field installed mounting hardware (included).
FINISH Housing is cleaned ultrasonically in detergent bath prior to painting. Standard finish is finely textured matte silver grey metallic, graphite grey, or black. Special colors available upon request.
WARRANTY Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer's limited warranty.
CERTIFICATION Listed for Wet Locations.
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
    Save     Add product     Send     Print   Back