High performance pole mounted indirect luminaire for applications where uniform, glare-free illumination and contemporary styling are desired.

Heavy-duty cast aluminum conical luminaire houses the primary reflector and electrical components and mounts to the fabricated steel bracket arm with concealed hardware. Secondary reflector bracket is integral to the pole and supports the formed aluminum roof, housing the secondary reflector system. Lens assembly consists of tempered glass lens bonded to matte acrylic lens retainer. Lens assembly is fastened to housing with four countersunk screws. All hardware is stainless steel.

Primary reflector system uses deep drawn parabolic reflector with specular surface to reduce uplight to 1.4% of total lamp lumens. Matte black band is press-fit to the inner perimeter of the reflector. Reflector is nested within the top of the luminaire and works in conjunction with secondary reflector described below. Machined tempered glass lens includes black ceramic masking.

Secondary reflector is composed of specially formulated injection molded plastic modules, consisting of nine facets each. Facet curvatures shall vary according to position within the secondary reflector, producing Type V square distribution with cut-off better than 60°. Facet surfaces are vacuum metallized for specularity and finished with double layer of protective clearcoat. Secondary reflector shall have 36 modules consisting of 324 individual facets.

Ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 base porcelain socket is 660w-600v, 5kV pulse rated.