High performance pole mounted indirect luminaire for applications where uniform, glare-free illumination and contemporary styling are desired.
HOUSING
Luminaire is extruded from 6060 aluminum and houses up to three primary reflectors. Housing is welded to the mounting bracket as an assembly. Clear tempered glass lens is bonded to machined aluminum ring and fastened to the luminaire with recessed setscrews. Secondary reflector bracket supports the formed aluminum roof, housing the secondary reflector system. Brackets for luminaire and secondary reflector are fastened to the pole with socket head cap screws. All hardware is stainless steel.
OPTICS
Primary reflector system uses deep drawn parabolic reflector with specular surface to reduce uplight to 1.4% of total lamp lumens. Matte black band is press-fit to the inner perimeter of the reflector. Reflector is nested within the top of the luminaire and works in conjunction with secondary reflector described below. Tempered glass lens includes black ceramic masking. Luminaire may be ordered with one, two, or three lamps.
Secondary reflector is composed of specially formulated injection molded plastic modules, consisting of nine facets each. Facet curvatures shall vary according to position within the secondary reflector and provide cut-off of approximately 60°. Facet surfaces are vacuum metallized for specularity and finished with double layer of protective clearcoat. Secondary reflector shall have 64 modules consisting of 576 individual facets and shall be tilted upward five degrees.
ELECTRICAL
Ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 base porcelain socket is 660w-600v, 5kV pulse rated. Ballasts are remote mounted in pole, accessible through separate handhole.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Ceramic Metal
Halide
CDM150/T6/830
T6
G12
70
Ceramic Metal
Halide
CDM70/T6/830
T6
G12
Lamps are included.
POLE
Straight round steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.157”. Flush mounted handhole covers for power connections and remote ballasts are plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 20 ’. Soil insert is required. See pole data sheet for mounting details.
FINISH
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back