High performance pole mounted indirect luminaire for applications where uniform, glare-free illumination and contemporary styling are desired.
HOUSING
Heavy-duty cast aluminum conical luminaire houses the primary reflector and electrical components and mounts to the fabricated steel bracket arm with concealed hardware. Secondary reflector bracket is integral to the pole and supports the formed aluminum roof, housing the secondary reflector system. Lens assembly consists of tempered glass lens bonded to matte acrylic lens retainer. Lens assembly is fastened to housing with four countersunk screws. All hardware is stainless steel.
OPTICS
Primary reflector system uses deep drawn parabolic reflector with specular surface to reduce uplight to 1.4% of total lamp lumens. Matte black band is press-fit to the inner perimeter of the reflector. Reflector is nested within the top of the luminaire and works in conjunction with secondary reflector described below. Machined tempered glass lens includes black ceramic masking.
Secondary reflector is composed of specially formulated injection molded plastic modules, consisting of nine facets each. Facet curvatures shall vary according to position within the secondary reflector, producing Type V square distribution with cut-off better than 60°. Facet surfaces are vacuum metallized for specularity and finished with double layer of protective clearcoat. Secondary reflector shall have 64 modules consisting of 576 individual facets.
ELECTRICAL
Ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. G12 base porcelain socket is 660w-600v, 5kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Ceramic Metal
Halide
CDM150/T6/830
T6
G12
70
Ceramic Metal
Halide
CDM70/T6/830
T6
G12
Lamp is included.
POLE
Slanted square steel pole with 7.5° incline is manufactured from cold drawn over mandrel, electric-weld, mechanical steel tubing with nominal wall thickness of 0.157”. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Nominal pole height is 16’. Soil insert is required. See pole data sheet for mounting details.
FINISH
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back