Illuminating bollard for low-level pathway illumination where contemporary styling is desired.
HOUSING
Two 6060 aluminum alloy sidewalls mount to the square cast aluminum base with concealed hardware. Sidewalls are 0.60” thick. Sidewalls have two ribs attached to the inner side to provide positive alignment of the lens. Matte acrylic lens with integral flange mounts to the sidewall and base. Two cast aluminum fascia elements seal the lens assembly to the single piece EPDM gasket on the base and are secured with countersunk stainless steel screws. All hardware is stainless steel.
OPTICS
Vertical lamps are positioned within the matte acrylic cubic lens providing soft diffused illumination.
ELECTRICAL
Compact fluorescent high frequency electronic ballasts shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating greater than 90% and be capable of reliable starting to -20°F (-30°C) at nominal line voltage and frequency of ±10%. Ballasts are UL and cUL recognized. 2G11 lamp socket is 75w-600v rated.
Bollard mounts to soil insert (included) with four M8 x 80 stainless steel socket head cap screws internal to the luminaire.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back