L E D I A LF ID 16" RGB LED Illuminating Tile
Project Name
 
Address
 
  City
 
  State
 
  ZIP
 

Dimensions           (right click to enlarge and/or print)


Type Model Size Volt

Color Option
  LEDIA-LF-ID 16 12 - 12 Volt DC

RGB

DIM - 3 Channel Dimming Module
SEQ - RGB Sequencer
N - None
 
Ordering Information
Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com

 
Specifications
   
DESCRIPTION LED illuminating tile for interior recessed in-floor use.
HOUSING

Tempered glass lens is 0.40” thick and bonded to the zinc plated steel luminaire housing providing a sealed enclosure. Exterior surface of lens is patterned with anti-slip squares produced from ceramic-based paint applied during the glass tempering process. Underside of lens is sandblasted and has matching square pattern screen-printed to the surface. LED light engine housing is constructed of zinc plated steel with special diffuser. All internal components are sealed to prevent moisture entry. Luminaire mounts onto adjustable luminaire supports consisting of stainless steel threaded rods and leveling pads secured to zinc plated steel mounting plate. Four luminaire supports are adjustable to allow overall height range of 2.4" to 5.5" to compensate for floor thickness. Luminaire is supplied with removable hot-dip galvanized steel form for rough-in installation. Recessed mounting plates and removable form may be preshipped upon request.

OPTICS Low wattage LED’s provide even illumination across the entire lens surface.
ELECTRICAL

Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).

Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional 3 channel dimming module and RGB color sequencer, suitable for dry locations, are available and require a 0-10v DC voltage controller (by others).

LAMPING

Maximum power consumption is 23 watts.

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.

WARRANTY

Limited product warranty period is three years. LED power supply (ordered separately), optional 3- channel dimmer, and optional RGB color sequencer shall carry the respective manufacturer’s limited warranty.

CERTIFICATION Listed 2108, Low Voltage Lighting Systems
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com