Machined tempered glass lens is 0.75” thick and bonded to the stainless steel luminaire housing providing a sealed enclosure. Exterior surface of lens is polished with chamfered edges. Underside of lens is diffused. LED light engine housing is constructed of stainless steel. All internal components are sealed to prevent moisture entry. Luminaire mounts into stainless steel sub-frame where electrical connections are made. Luminaire is supplied with removable extruded aluminum form for rough-in installation. Recessed frame and removable form may be preshipped upon request.

Remote 60w LED driver is sold separately and may be used to power multiple luminaires. Universal voltage LED driver accepts 100v through 277v, 50/60 Hz input and provides 12v DC to luminaire. Driver shall have a high power factor rating greater than 95%. Maximum power consumption is 71 watts. UL Recognized driver has a minimum start temperature is -25°C(-13°F) and maximum ambient rating of 38°C (100°F).

Luminaire is supplied with pigtail connectors and waterproof wire nuts. Wiring from LED power supply to luminaire and wiring between luminaires shall be supplied by others. Optional dimming module, suitable for dry locations, is available and requires a 10v DC voltage controller (by others).

Limited product warranty period is three years. LED driver (ordered separately) and optional dimming module shall carry the respective manufacturer’s limited warranty.