LED bollard provides asymmetric light distribution pattern suitable for pathways and sidewalks with zero uplight, suitable for use in all LEED lighting zones.
HOUSING
Single piece bollard consists of luminaire head and shaft fabricated from rectangular aluminum alloy with radiussed corners. Nominal wall thickness is 0.187" with cross-section of 7.5" x 3.5". LED light engine and driver are housed in self contained weather-proof powerpack enclosure within the bollard and removable with a single fastener. Lens is clear impact-resistant acrylic. LED array is thermally managed using convection and transmission of heat through the use of an aluminum heat sink and the luminaire housing. All hardware is stainless steel.
Contact factory for hot-dip galvanized steel housing for high abuse environments.
OPTICS
LED light engine consists of high output LEDs fitted with prismatic lens optics to produce an asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits no light above 90 degrees and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature may be 3000K or 4000K.
ELECTRICAL
Standard output: Integral LED driver is housed in luminaire head and consumes 19 watts at 350 mA. Input voltage range is 120v - 277v AC, 50-60 Hz. LED driver shall be UL recognized.
High output: Integral LED driver is housed in luminaire head and consumes 39 watts at 700 mA. Input voltage range is 120v - 277v AC, 50-60 Hz. LED driver shall be UL recognized.
LAMPING
Module
Drive current
Source
Delivered lumens (3000K)
Delivered lumens (4000K)
Power Consumption
Medium output
350mA
LED
376 lms
428 lms
19 watts
High output
700mA
LED
659 lms
728 lms
38 watts
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.
MOUNTING
Flangeless mounting is standard. Optional external flange mounting available on request. Consult factory for mounting details.
FINISH
Standard finishes are matte silver gray metallic or graphite grey. Special colors available on request. Optional steel housing is is hot-dip galvanized inside and out prior to being finished in finely textured paint.
WARRANTY
Limited product warranty period including LEDs is three years. Driver shall carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back