HessAmerica Specsheets

L I N E A 9 5 0 LED Illuminating Bollard (steel housing)	Project Name
	Address
	City
	State
	ZIP

Dimensions (right click to enlarge and/or print)

Type	Model	Lamp	Color Temp	Volt	Mounting	Pole	Finish	Option
	LN950	LO-LED	CW - 5600K	UNV - 120 through 277v	D - Bollard	03SRS - 3' Straight Rectangular Steel	SG - Silver Grey GG - Graphite Grey CC -Custom Color	N - None EF - External Flange

Ordering Information

Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com

Specifications

DESCRIPTION

LED bollard provides asymmetric light distribution pattern suitable for pathways and sidewalks with zero uplight, suitable for use in all LEED lighting zones. Hot-dip galvanized steel housing is suitable for high-abuse environments.

HOUSING

Single piece bollard consists of luminaire head and shaft fabricated from rectangular steel tubing with radiussed corners. Nominal wall thickness is 0.157" with cross-section of 7.1" x 3.1". LED light engine and driver are housed in self contained weather-proof powerpack enclosure within the bollard and removable with a single fastener. Lens is clear impact-resistant polycarbonate. LED array is thermally managed using convection and transmission of heat through the use of an aluminum heat sink and the luminaire housing. All hardware is stainless steel.

OPTICS

LED light engine consists of eight high output LEDs fitted with prismatic lens optics to produce an asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits no light above 90 degrees and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperatureis 5600K.

ELECTRICAL

Integral LED driver is housed in luminaire head and consumes 12 watts. Input voltage range is 120v - 277v AC, 50-60 Hz. LED driver shall be UL recognized.

LAMPING

Source
Drive current
Source
Color Temperature
Power Consumption

LED
350mA
LED
5600K
12 watts

LEDs included.

NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.

MOUNTING

Flangeless mounting is standard. Optional external flange mounting available on request. Consult factory for mounting details.

FINISH

Standard finishes are matte silver gray metallic or graphite grey. Special colors available on request. Optional steel housing is is hot-dip galvanized inside and out prior to being finished in finely textured paint.

WARRANTY

Limited product warranty period including LEDs is three years. Driver shall carry the manufacturer’s limited warranty.

CERTIFICATION

Listed for Wet Locations.

Specifications are subject to change without notification