Twin low profile housings are extruded from 6060 aluminum then anodized. Linear teardrop lens is milled to shape from extruded acrylic then polished for optical clarity. Lens slides into extruded housing and is sealed with closed cell silicone gasketing. Each housing contains twelve 1 watt high-power LEDs fitted with prismatic lens optics. Circuit boards are fitted with integral heat sinks. Housing end plates provide access to interior of luminaire and are gasketed to provide a weather tight seal to the housing. End plates are anodized to match luminaire and pole. Housings mount to single cast aluminum bracket. Bracket assembly is secured to T-slot in extruded aluminum pole and secured with socket head cap screws. Twin housing luminaire is available in single or back-to-back mounting configurations. All hardware is stainless steel.

LED power supply with electrical quick connectors is mounted in the pole top. Power supply requires 120v line voltage and provides 24v DC to luminaire. Total power consumption is32 watts.

Twenty-four 1 watt LEDs provide color temperature of 5600K and CRI greater than 80.

Aluminum pole is extruded from 6060 aluminum then anodized. Flush mounted handhole cover is precision machined from matching extrusion with kerf not to exceed 1mm and includes triangular tamper-resistant locking device. Extruded T-slots in the pole shaft allow for mounting of optional site amenities. Pole mounts to soil insert and is secured with four stainless steel socket head cap bolts. Specify 12' or 14' nominal pole height.