Wall mounted
luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Cylindrical post
top luminaire consists of roof, shade, and external louvers with matching
profiles. Four stainless steel upper support rods separate the heavy-duty
cast aluminum roof and spun aluminum shade, forming an aperture at
the top of the luminaire. Machined lower rods support the shade and
retain three spun aluminum external louvers midway along its length.
Shade and louvers shall be free from burrs and sharp edges. Heavy-duty
cast aluminum base with integral slipfitter anchors the support rods,
and is machined to include groove for gasketing and mounting surface
for the lens and ballast enclosure. Roof and base are gasketed to
provide a weather-tight seal to the clear acrylic cylindrical lens.
Luminaire slipfits 2.4" O.D. tenon, and has built-in stop to
limit insertion depth to 2.2". Two offset rows of three 10mm
recessed setscrews secure the luminaire to the pole. All hardware
is stainless steel.
OPTICS
Vertical base
down lamp is positioned within the clear cylindrical acrylic lens.
Three external louvers, painted to match the fixture, shield the lamp
at normal viewing angles. Underside of spun aluminum shade and roof
are painted white. Optional internal louvers are available for symmetric
and asymmetric distributions to provide additional brightness control.
ELECTRICAL
Electrical components are mounted in a conical spun aluminum enclosure
at the base of the luminaire. Enclosure is painted white.
Ceramic metal halide core and coil ballast with class "H"
(180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter
combination shall be capable of reliable starting to -20°F (-30°C)
at nominal line voltage of ±10%. Ballast, capacitor, and
starter are UL and CSA recognized. Medium base porcelain socket
is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class "H"
(180°C) insulation system shall have a minimum high power factor
rating of 90% and nominal ballast factor of 1.0. Ballast and starter
combination shall be capable of reliable starting to -40°F (-40°C)
at nominal line voltage of ±10%. Ballast, capacitor, and
starter are UL and CSA recognized. Medium base porcelain socket
is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
70
Ceramic Metal
Halide
MHC70/C/U/M
ED-17
Medium
50
Ceramic Metal
Halide
MHC50/C/U/M
ED-17
Medium
70
High Pressure
Sodium
C70S62/D/M
ED-17
Medium
50
High Pressure
Sodium
C50S68/D/M
ED-17
Medium
Lamp is included.
MOUNTING
Fabricated steel
bracket assembly mounts over junction box and is secured to the wall
in four places. Two parallel square tubes with 2.4" O.D. tenon
are welded to the 0.24" thick mounting plate. Mounting bracket
is hot-dip galvanized with coating inside and out, then lightly sanded
prior to painting. Bracket assembly ships prewired with fishtape.
FINISH
Housing is cleaned
ultrasonically prior to painting. Standard finish is finely textured
matte silver grey metallic or black. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back