Illuminating bollard
for applications where contemporary styling is desired.
HOUSING
Wedge-shaped housing
is cast from high-grade aluminum alloy with integrated cooling fins
to enhance heat dissipation. Segregated ballast compartment with separate
cast aluminum cover is thermally isolated from the optical system,
ensuring optimal operating environment for electrical components.
Door assembly is one piece brushed stainless steel and sealed with
closed cell silicone gasketing when closed. Door is retained by captive
stainless steel socket head cap screws. Braided stainless steel line
houses cable, terminating in watertight couplings at both ends. Housing
is adjustable by means of two precision-machined polished stainless
steel knobs. Mounting bracket assembly is fabricated steel, hot-dip
galvanized prior to painting. Two offset rows of three recessed setscrews
secure the mounting bracket to the bollard shaft. Luminaire is available
in single or twin mount configurations. All hardware is stainless
steel.
OPTICS
Horizontal lamp
is housed in small hammertone, bright finish optical system, laser
cut for precise reproduction. 5/32” thick clear impact resistant
tempered glass lens is bonded with silicone to the doorframe. Optional
matte glass lens is available upon request.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be
Class P and Outdoor Type 1 rated. Ballast shall have a minimum high
power factor rating of 98% and nominal ballast factor of 0.97. Total
harmonic distrortion shall be less than 10%. Ballast shall be capable
of reliable starting to 0°F (-18°C) at nominal line voltage
and frequency of ±10%. G24q-3 lamp socket is 75w-600v rated.\
Straight round
bollard shaft is manufactured from cold drawn over mandrel, electric-weld,
mechanical round steel tubing with nominal wall thickness of 0.126”.
Flush mounted handhole cover is plasma cut with kerf not to exceed
1/8” and includes triangular tamper-resistant locking device.
Tenon is machined and inserted into the pole shaft then plug welded,
showing no visible weld at the transition. Shaft is hot-dip galvanized
with coating inside and out, then lightly sanded prior to painting.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back