Illuminating LED bollard
for applications where contemporary styling is desired.
HOUSING
Wedge-shaped housing
is cast from high-grade aluminum alloy with integrated cooling fins
to enhance heat dissipation. Segregated electrical compartment with separate
cast aluminum cover is thermally isolated from the optical system,
ensuring optimal operating environment for electrical components.
Door assembly is one piece brushed stainless steel and sealed with
closed cell silicone gasketing when closed. Door is retained by captive
stainless steel socket head cap screws. Braided stainless steel line
houses cable, terminating in watertight couplings at both ends. Housing
is adjustable by means of two precision-machined polished stainless
steel knobs. Mounting bracket assembly is fabricated steel, hot-dip
galvanized prior to painting. Two offset rows of three recessed setscrews
secure the mounting bracket to the bollard shaft. Luminaire is available
in single or twin mount configurations. All hardware is stainless
steel.
OPTICS
LED light engine consists of 1-watt LEDs fitted with prismatic lens optics to produce an asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits no light above 90 degrees and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature is 5600K with CRI of 70.
ELECTRICAL
Integral LED driver is housed in luminaire head and consumes 10 watts at 350 mA. Input voltage range is 120v - 240v AC, 50-60 Hz. LED driver shall be UL recognized.
LAMPING
Wattage
Source
Color Temperature
CRI
Other
1-watt LEDs - Max power consumtion: 10 watts
LED
5600K
70
Includes prismatic lens optics
LEDs included.
SHAFT
Straight round
bollard shaft is manufactured from cold drawn over mandrel, electric-weld,
mechanical round steel tubing with nominal wall thickness of 0.126”.
Flush mounted handhole cover is plasma cut with kerf not to exceed
1/8” and includes triangular tamper-resistant locking device.
Tenon is machined and inserted into the pole shaft then plug welded,
showing no visible weld at the transition. Shaft is hot-dip galvanized
with coating inside and out, then lightly sanded prior to painting.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back