N O V A R A  2 6 0 0  V R B Halogen Illuminating Bollard
 Project Name
 
Address
 
  City
 
  State
 
  ZIP
 

Dimensions           (right click to enlarge and/or print)


Type Model Watt Lamp Volt

Mounting

 Height Finish Option
  NV260VRB 100
 H – Halogen
(120v only)		 2 - 120 B – Single Mount
2B – Twin Mount		 03RS – 3’ Round Straight
X – Other (specify) 		  SG - Silver Grey
CC - Custom Color		 SF – Single Fuse
MG – Matte Glass
N - None
 
Ordering Information
Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
    Save     Add product     Send     Print   Back
 
Specifications
   
DESCRIPTION Vandal resistant illuminating bollard for applications where contemporary styling is desired.
HOUSING Wedge-shaped housing is cast from high-grade aluminum alloy with integrated cooling fins to enhance heat dissipation. Segregated ballast compartment with separate cast aluminum cover is thermally isolated from the optical system, ensuring optimal operating environment for electrical components. Door assembly is one piece brushed stainless steel and sealed with closed cell silicone gasketing when closed. Door is retained by captive stainless steel socket head cap screws. High-grade aluminum alloy conduit between housing and slipfitter houses cable. Housing is locked into position with four stainless steel socket head bolts. Mounting bracket assembly is fabricated steel, hot-dip galvanized prior to painting. Two offset rows of three recessed setscrews secure the mounting bracket to the bollard shaft. Luminaire is available in single or twin mount configurations. All hardware is stainless steel.
OPTICS Horizontal lamp is housed in small hammertone, bright finish optical system, laser cut for precise reproduction. 5/32” thick clear impact resistant tempered glass lens is bonded with silicone to the doorframe. Optional matte glass lens is available upon request.
ELECTRICAL

Halogen model is available in 120-volt line voltage only. Porcelain RSC sockets are 500w-250v rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base		 100
Halogen
100T3Q/CL
T3
RSC

Lamp is included.
SHAFT Steel bollard shaft is manufactured from cold drawn seamless mechanical tubing with nominal wall thickness of 0.126”. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Tenon is machined and plug welded into the bollard shaft, showing no visible weld at the transition. Shaft is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting.
FINISH Housing is ultrasonically cleaned prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY Limited product warranty period is three years. Lamps and ballasts shall carry the respective manufacturer's limited warranty.
CERTIFICATION Listed for Wet Locations.
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
    Save     Add product     Send     Print   Back
 
Specifications
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com