Vandal resistant LED
illuminating bollard for applications where contemporary styling is
desired.
HOUSING
Wedge-shaped housing
is cast from high-grade aluminum alloy with integrated cooling fins
to enhance heat dissipation. Segregated electrical compartment with separate
cast aluminum cover is thermally isolated from the optical system,
ensuring optimal operating environment for electrical components.
Door assembly is one piece brushed stainless steel and sealed with
closed cell silicone gasketing when closed. Door is retained by captive
stainless steel socket head cap screws. High-grade aluminum alloy
conduit between housing and slipfitter houses cable. Housing is locked
into position with four stainless steel socket head bolts. Mounting
bracket assembly is fabricated steel, hot-dip galvanized prior to
painting. Two offset rows of three recessed setscrews secure the mounting
bracket to the bollard shaft. Luminaire is available in single or
twin mount configurations. All hardware is stainless steel.
OPTICS
LED light engine consists of 1-watt LEDs fitted with prismatic lens optics to produce an asymmetric light distribution pattern suitable for pathways and sidewalks. Luminaire emits no light above 90 degrees and qualifies for use in LEED zones LZ1, LZ2, LZ3, and LZ4. Color temperature is 5600K with CRI of 70.
ELECTRICAL
Integral LED driver is housed in luminaire head and consumes 10 watts at 350 mA. Input voltage range is 120v - 240v AC, 50-60 Hz. LED driver shall be UL recognized.
LAMPING
Wattage
Source
Color Temperature
CRI
Other
1-watt LEDs - Max power consumption: 10watts
LED
5600K
70
Includes prismatice lens optics
LEDs included.
SHAFT
Steel bollard shaft
is manufactured from cold drawn seamless mechanical tubing with nominal
wall thickness of 0.126”. Flush mounted handhole cover is plasma
cut with kerf not to exceed 1/8” and includes triangular tamper-resistant
locking device. Tenon is machined and plug welded into the bollard
shaft, showing no visible weld at the transition. Shaft is hot-dip
galvanized with coating inside and out, then lightly sanded prior
to painting.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back