Pendant mounted
luminaire for interior applications where contemporary styling is
desired.
HOUSING
Wedge-shaped housing
is cast from high-grade aluminum alloy with integrated cooling fins
to enhance heat dissipation. Segregated ballast compartment with separate
cast aluminum cover is thermally isolated from the optical system,
ensuring optimal operating environment for electrical components.
Door assembly is one piece brushed stainless steel and sealed with
closed cell silicone gasketing when closed. Hinged door is retained
by two captive stainless steel socket head cap screws for ease of
maintenance. Braided stainless steel line houses weatherproof electrical
cord, terminating in watertight couplings at both ends. Brushed stainless
steel bracket assembly is available in single or twin mount configurations.
Single mount luminaire is available in direct position only. Twin
mount configuration may be mounted in direct or indirect position.
All hardware is stainless steel.
OPTICS
Horizontal lamp
is housed in small hammertone, bright finish optical system, laser
cut for precise reproduction. 0.20 thick impact resistant tempered
glass lens is clear or matte and bonded with silicone to the doorframe.
Specify clear or matte lens.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be
Class P and Outdoor Type 1 rated. Ballast shall have a minimum high
power factor rating of 98% and nominal ballast factor of 0.97. Total
harmonic distortion shall be less than 10%. Ballast shall be capable
of reliable starting to 0°F (-18°C) at nominal line voltage
and frequency of ±10%. GX24q-4 lamp socket is 75w-600v rated.
Luminaire assembly
mounts over octagon box, supplied by others. Canopy is precision machined
from aluminum then satin anodized. Stem is finished to match. Custom
pendant lengths are available.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for Wet Locations. (Direct position).
Listed for Damp Locations (Indirect position).
Specifications are subject to change without notification