Oval shaped housing with finned detailing is extruded 6060 aluminum. Luminaire roof and bottom are cast aluminum and sealed to the housing with closed cell silicone gasketing. Circular prismatic lens is UV-stabilized polycarbonate and bonded to the hinged lens frame. Single quarter-turn fastener provides tool-less access to LEDs and driver. Slipfitter is fabricated from machined aluminum and is secured to the pole-top tenon with two offset rows of three recessed setscrews. Luminaire is available in single or twin mount configurations. All hardware is stainless steel.

Anodized parabolic reflector is spun aluminum with sandblasted finish. Two multi-chip LEDs are mounted vertically to the primary heat sink in a back-to-back configuration at the focal point of the reflector. Light is directed outward through the luminaire's prismatic lens of UV-stabilized polycarbonate, producing a uniform asymmetric distribution pattern suitable for walkways and other long and narrow applications. Prisms on the inside of the lens act to eliminate disabiility glare associated with high-power LEDs while the smooth outer surface lens mitigates potential dirt accumulation.

Straight round steel pole is manufactured from cold drawn over mandrel, electric-weld, mechanical round steel tubing with nominal wall thickness of 0.142”. Flush mounted handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Pole is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Base cover is one-piece 0.080” spun aluminum and finished to match the pole. Nominal pole height is 15'.

Contact factory for aluminum poles.