Pole mounted luminaire
for outdoor applications where contemporary styling is desired.
HOUSING
Luminaire housing
with integral ballast assembly is cast from high-grade aluminum alloy
with heavy cooling fins to enhance heat dissipation. Doorframe is
one-piece cast aluminum and hinged for easy maintenance. Machined
tempered glass lens is mechanically retained and bonded to the doorframe
forming a flush fit to the exterior surface. Door assembly is sealed
with closed cell silicone gasketing and secured by two captive socket
head cap screws for ease of maintenance. Braided stainless steel line
houses weatherproof electrical cord, terminating in watertight couplings
at both ends. Housing is adjustable to 0°, 10°, 20°, 30°,
or 40° above horizontal by means of two precision machined polished
stainless steel knobs and locked into place with two regressed locking
bolts. Hot-dip galvanized steel mounting bracket with integral slipfitter
for 3 ¼” O.D. tenon has two offset rows of three stainless
steel setscrews to secure and level luminaire to the pole.
OPTICS
Horizontal double-ended
lamp is housed in specular anodized aluminum reflector, laser cut
for precise reproduction. Clear tempered glass lens is bonded with
silicone to the doorframe. Optional matte glass lens is available
upon request.
ELECTRICAL
Metal halide core
and coil ballast with class “H” (180°C) insulation system
shall have a minimum high power factor rating of 90% and nominal ballast
factor of 1.0. Ballast and starter combination shall be capable of
reliable starting to –20°F (-30°C) at nominal line voltage
of ±10%. Ballast, capacitor, and starter are UL and CSA recognized.
RX7s porcelain sockets are 660w-600v, 5kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
Ceramic Metal Halide
CDM150/TD/830
TD-7
RX7s
70
Ceramic Metal Halide
CDM70/TD/830
TD-6
RX7s
Lamp is included.
POLE
Straight round steel
pole is manufactured from cold drawn seamless mechanical tubing with
nominal wall thickness of 0.142”. Flush mounted handhole cover
is plasma cut with kerf not to exceed 1/8” and includes triangular
tamper-resistant locking device. Pole key is included. Tenon is machined
and inserted into the pole shaft, then plug welded, showing no visible
weld at the transition. Pole is hot-dip galvanized with coating inside
and out, then lightly sanded for bonding of paint. Base cover is one-piece
0.080” spun aluminum and finished to match the pole. Specify
pole height of 12’ or 15’ overall nominal height. See pole
data sheet for mounting details.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back