Wall mounted luminaire
where contemporary styling is desired.
HOUSING
Wedge-shaped housing
is cast from high-grade aluminum alloy with integrated cooling fins
to enhance heat dissipation. Segregated ballast compartment with separate
cast aluminum cover is thermally isolated from the optical system,
ensuring optimal operating environment for electrical components.
Door assembly is one piece brushed stainless steel and sealed with
closed cell silicone gasketing when closed. Hinged door is retained
by two captive stainless steel socket head cap screws for ease of
maintenance. Braided stainless steel line houses weatherproof electrical
cord, terminating in watertight couplings at both ends. Housing is
adjustable to 0°, 10°, 20°, 30°, or 40° above
horizontal by means of two precision machined polished stainless steel
knobs and locked into place with two regressed locking bolts.
OPTICS
Horizontal lamp
is housed in small hammertone, bright finish optical system, laser
cut for precise reproduction. Clear tempered glass lens is 0.20”
thick and bonded with silicone to the doorframe. Optional matte glass
lens is available upon request.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be
Class P and Outdoor Type 1 rated. Ballast shall have a minimum high
power factor rating of 97% and nominal ballast factor of 0.99. Total
harmonic distrortion shall be less than 10%. Ballast shall be capable
of reliable starting to 0°F (-18°C) at nominal line voltage
and frequency of ±10%. Lamp socket with 2G11 base is 660w-600v
rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
2/24
Compact Fluorescent
PL-L 24W/841
PL-L
2G11
Lamp is included.
MOUNTING
Fabricated steel
bracket assembly mounts over junction box and is secured to the wall
in four places. Mounting bracket is hot-dip galvanized with coating
inside and out, then lightly sanded prior to painting.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for Wet Locations (Direct position).
Listed for Damp Locations (Indirect position).
Specifications are subject to change without notification
Save
Add product
Send
Print
Back