Pole mounted luminaire
for outdoor applications where contemporary styling is desired.
HOUSING
Wedge-shaped housing
is cast from high-grade aluminum alloy with integrated cooling fins
to enhance heat dissipation. Segregated ballast compartment with separate
cast aluminum cover is thermally isolated from the optical system,
ensuring optimal operating environment for electrical components.
Door assembly is one piece brushed stainless steel and sealed with
closed cell silicone gasketing when closed. Hinged door is retained
by two captive stainless steel socket head cap screws for ease of
maintenance. Braided stainless steel line houses weatherproof electrical
cord, terminating in watertight couplings at both ends. Housing is
adjustable to 0°, 10°, 20°, 30°, or 40° above
horizontal by means of two precision machined polished stainless steel
knobs and locked into place with two regressed locking bolts. Hot-dip
galvanized steel mounting bracket with integral slipfitter has two
offset rows of three stainless steel setscrews to secure and level
luminaire to the pole.
OPTICS
Horizontal lamp
is housed in small hammertone, bright finish optical system, laser
cut for precise reproduction. 0.20” thick impact resistant tempered
glass lens is clear or matte and bonded with silicone to the doorframe.
Specify clear or matte lens.
ELECTRICAL
400w and 250w ceramic metal halide: Core and coil ballast with class "H" (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to -40°F (-40°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Mogul base porcelain socket is 1500w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
400
Ceramic Metal
Halide
CMH400/U/830
ED18
Mogul
250
Ceramic Metal
Halide
CMH250/U/830
T15
Mogul
Lamp is included.
POLE
Straight round steel
pole is manufactured from cold drawn over mandrel, electric-weld,
mechanical round steel tubing with nominal wall thickness of 0.177”.
Flush mounted handhole cover is plasma cut with kerf not to exceed
1/8” and includes triangular tamper-resistant locking device.
Tenon is machined and inserted into the pole shaft then plug welded,
showing no visible weld at the transition. Shaft is hot-dip galvanized
with coating inside and out, then lightly sanded prior to painting.
Base cover is one-piece 0.080” spun aluminum and finished to
match the pole. Specify 21’ or 26’ nominal pole height.
See pole data sheet for mounting details.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte
silver grey metallic. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back