Wall mounted indirect luminaire where contemporary styling is desired.
HOUSING
Shallow hemispherical luminaire housing and doorframe are cast aluminum. Machined tempered glass lens is bonded to the doorframe forming a flush fit to the exterior surface. Hinged door assembly is secured with single captive socket head cap screw and sealed to the housing with one-piece closed cell silicone gasket. All hardware is stainless steel.
OPTICS
Specular hammertone scoop reflector assembly is laser cut for precise reproduction. Horizontal double-ended lamp is nested within reflector and is shielded from normal viewing angles.
ELECTRICAL
Ceramic metal halide electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
70
Ceramic Metal Halide
CDM70/TD/830
TD-6
RX7S
Lamp is included
MOUNTING
Angular fabricated steel wall bracket with integrated mounting plate is hot-dip galvanized, then lightly sanded prior to painting. Mounting plate attaches to the wall surface in four places over 4” octagon box with factory-supplied wall anchors. Wall bracket is secured to the mounting plate with concealed stainless steel setscrews.
FINISH
Housing is cleaned in an ultrasonic detergent bath prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballasts shall carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back