Illuminated bench is constructed from tempered glass panels bonded together. Anti-slip squares on the exterior surface are ceramic-based paint applied prior to the glass tempering process. Inner surface is sandblasted and has matching square pattern screen-printed to the surface. Side panels are 0.60” thick with mitered edges. Seat panel is 0.75” thick. Horizontal matte acrylic panel is bonded to inside bottom of bench. Bench mounts to stainless steel housing containing lamps and electrical components and is secured with two socket head cap screws on each end. Heavy duty profiled gasket prevents glass to metal contact and provides a weather tight seal. Housing mounts to recessed stainless steel sub frame where electrical connections are made. Bench is supplied with removable hot-dip galvanized steel form for rough-in installation. Recessed sub frame and removable form may be preshipped upon request.

Horizontal matte acrylic lens provides diffused illumination within the bench. Exterior anti-slip squares and matching interior pattern interact to produce a three-dimensional effect. Specify blue or white.

Fluorescent electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating greater than 90%. Ballast shall be capable of reliable starting to 0°F (-18°C) at nominal line voltage and frequency of ±10%. Total harmonic distortion shall be less 20%. Medium bi-pin lamp sockets are 660W-600v rated. All electrical components shall be UL recognized.

Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.