Spherical caged wall mounted luminaire consists of housing, globe, and fabricated cage assembly with integral slipfitter. Luminaire housing is machined from 6060 aluminum and grooved to accept one piece closed cell silicone gasketing for a weather tight seal to the globe. Spherical opaque acrylic globe installs to the housing with quarter turn and is secured with single socket head cap screw. Housing mounts to the cage assembly with threaded brass bushing and locked into place with a single recessed setscrew. Cage assembly is constructed of four curved steel rods welded to the mounting bracket. Three external aluminum rings fasten to the top of the cage assembly with spacers and hardware. All hardware is stainless steel.

Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 98% and nominal ballast factor of 0.98. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to 0°F (-18°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and CSA recognized. G24q-3 lamp socket is 75w-600v rated.

Fabricated steel wall bracket with welded cage assembly consists of two round steel tubes welded to the bracket wall plate. Mounting bracket mounts over single gang switch box and is secured to the wall surface in four places with customer-supplied hardware. Bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships prewired with fishtape.