Wall mounted luminaire for outdoor applications where contemporary styling is desired.
HOUSING
Spherical caged wall mounted luminaire consists of housing, globe, and fabricated cage assembly with integral slipfitter. Luminaire housing is machined from 6060 aluminum and grooved to accept one piece closed cell silicone gasketing for a weather tight seal to the globe. Spherical opaque acrylic globe installs to the housing with quarter turn and is secured with single socket head cap screw. Housing mounts to the cage assembly with threaded brass bushing and locked into place with a single recessed setscrew. Cage assembly is constructed of four curved steel rods welded to the mounting bracket. hree external aluminum rings fasten to the top of the cage assembly with spacers and hardware. All hardware is stainless steel.
OPTICS
Vertical base down lamp is positioned within the spherical opaque acrylic lens. Internal specular top reflector redirects uplight to the ground producing symmetrical light distribution.
ELECTRICAL
Ceramic metal halide core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –20°F (-30°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
High pressure sodium core and coil ballast with class “H” (180°C) insulation system shall have a minimum high power factor rating of 90% and nominal ballast factor of 1.0. Ballast and starter combination shall be capable of reliable starting to –40°F (-40°C) at nominal line voltage of ±10%. Ballast, capacitor, and starter are UL and CSA recognized. Medium base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
70
Ceramic Metal
Halide
MHC70/C/U/M
ED-17
Medium
70
High Pressure Sodium
C70S62/D/M
ED-17
Medium
Lamp is included.
MOUNTING
Fabricated steel wall bracket with welded cage assembly consists of two round steel tubes welded to the bracket wall plate. Mounting bracket mounts over single gang switch box and is secured to the wall surface in four places with customer-supplied hardware. Bracket is hot-dip galvanized with coating inside and out, then lightly sanded prior to painting. Bracket assembly ships prewired with fishtape.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic or black. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamp and ballast shall carry the respective
manufacturer's limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back