Wall mounted LED powered luminaire for indoor and outdoor applications where contemporary styling is desired.
HOUSING
One-piece luminaire base is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens with two guide pins twists and locks onto luminaire base and is secured with a single recessed setscrews. One-piece closed cell silicone gasketing provides a weather-tight seal to the housing. Housing fastens to the one-piece cast aluminum inverted tapered wall bracket with three recessed setscrews and is sealed with one-piece closed cell silicone gasket. Wall bracket has 12° tilt away from wall surface. LED driver mounts to plate on the underside of the housing and housed in the top of the bracket. All hardware is stainless steel.
OPTICS
LED with MR16 style form factor mounted at the luminaire base is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.
ELECTRICAL
LED driver consumes 3.6 watts at 350 mA and is integral to the inverted taper wall bracket. Input voltage to driver is 110v thru 240v AC with 50-60 Hz. Driver shall be UL recognized.
LAMPING
Wattage
Source
Lamp
Lamp Life
Colors
3.6 watts maximum power consumption
LED
MR16 style form factor
50,000 hours
Red, blue, green, amber, white, warm white
LEDs are included.
MOUNTING
Tapered cast aluminum housing with integral arm mounts over single gang switchbox and is secured to surface with four factory supplied socket head lag screws and anchors. Optional adapter plate to mount standard luminaire over 4” octagon box is available upon request.
FINISH
Luminaire base is satin anodized aluminum. Standard finish for cast aluminum housing is finely textured matte silver gray metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballasts shall carry the manufacturer’s limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back