Wall mounted luminaire for indoor and outdoor applications where contemporary styling is desired.
HOUSING
One-piece luminaire base is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens with two guide pins twists and locks onto luminaire base and is secured with a single recessed setscrew. One-piece closed cell silicone gasketing provides a weather-tight seal. Luminaire base fastens to the one-piece cast aluminum tapered housing with three recessed setscrews and is sealed with one-piece closed cell silicone gasket. Electronic ballast mounts to plate on the underside of the base and is housed in the top of the housing. All hardware is stainless steel.
OPTICS
Vertical, base down lamp is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 98% and nominal ballast factor of 0.98. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to 0°F (-18°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and CSA recognized. G24q-3 lamp socket is 75w-600v rated.
Tapered cast aluminum housing with integral arm mounts over single gang switchbox and is secured to surface with four factory supplied socket head lag screws and anchors. Optional adapter plate to mount standard luminaire over 4” octagon box is available upon request.
FINISH
Luminaire base is satin anodized aluminum. Standard finish for cast aluminum housing is finely textured matte silver gray metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballasts shall carry the manufacturer’s limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back