R I V A  9 0 0 Illuminating Bollard
 Project Name
 
Address
 
  City
 
  State
 
  ZIP
 

Dimensions           (right click to enlarge and/or print)

Type Model Watt Lamp Volt

Mounting

 Pole Finish Option
  RV900 26 CF - Compact Fluorescent 2 - 120
7 - 277
 B - Bollard 03IT - 3' Inverted Taper   SG - Silver Grey
CC -Custom Color		 SF - Single Fuse
N - None
 
Ordering Information
Comment
Specifications are subject to change without notification

HessAmerica . P.O. Box 28 . Gaffney,SC 29342 . Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
    Save     Add product     Send     Print   Back
 
Specifications
   
DESCRIPTION Illuminating bollard for indoor and outdoor applications where contemporary styling is desired.
HOUSING One-piece luminaire base housing is precision-machined from 6060 billet aluminum, then satin anodized. Cylindrical matte acrylic lens with two guide pins twists and locks onto luminaire base and is secured with a three button head cap screws. Luminaire assembly fastens to the one-piece cast aluminum inverted tapered bollard shaft with three concealed socket head cap screws and is sealed with one-piece closed cell silicone gasket. Electronic ballast mounts to bracket on the underside of the housing and is housed in the top of the bracket. All hardware is stainless steel.
OPTICS Vertical, base down lamp is positioned within the cylindrical matte acrylic lens producing symmetrical distribution.
ELECTRICAL

Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 98% and nominal ballast factor of 0.98. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to 0°F (-18°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and CSA recognized. G24q-3 lamp socket is 75w-600v rated.

LAMPING
Wattage     
Source
Lamp
Bulb
Base
 26
Compact Fluorescent     
PL-C 26W/830/4P
PL-C
G24q-3

Lamp is included.
MOUNTING

Inverted tapered bollard shaft with integral flange plate is cast aluminum with nominal wall thickness of 0.24”. Bollard shaft mounts to anchor base plate assembly with four M10 x 20mm stainless steel socket head cap screws. Anchor base assembly consists of four 3/8” x 10” x 1-1/2” hot-dip galvanized anchor rods secured to a mounting plate and embedded as an assembly in concrete foundation (by others). See pole data sheet for mounting details.

FINISH Housing is satin anodized aluminum. Standard finish for bollard shaft is finely textured matte silver gray metallic. Special colors available on request.
WARRANTY Limited product warranty period is three years. Lamp and transformer shall carry the manufacturer’s limited warranty.
CERTIFICATION Listed for Wet Locations.
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com
    Save     Add product     Send     Print   Back
 
Specifications
Specifications are subject to change without notification
HessAmerica . P.O. Box 28 . Gaffney,SC 29342. Phone: 864-487-3535 . Fax: 864-487-3175 . www.hessamerica.com