Wall mounted indirect luminaire where contemporary styling is desired.
HOUSING
Wedge shaped housing is cast aluminum. Finned front cover is cast aluminum and mounts to housing with four socket head cap screws. Brushed stainless steel doorframe is secured to the housing with four captive socket head cap screws. Clear tempered glass lens is bonded to the doorframe for a weather tight seal. Vertical tempered glass panel with beveled edges is frosted and mounted to the luminaire with concealed hardware and bracketry. Concealed neoprene gaskets at the base of both sides of the panel prevent glass to metal contact between luminaire and mounting brackets. Housing is gasketed with one-piece closed cell silicone gaskets to provide a weather tight seal to the front cover and doorframe. Luminaire mounts to the wall surface over 3.5” or 4” octagon box with factory-supplied wall anchors. All hardware is stainless steel.
OPTICS
Lamp is housed within the specular hammertone reflector projecting light upward. Lens is clear tempered glass. Optional matte glass lens is available upon request. Vertical frosted glass panel illuminates with soft radiant glow.
ELECTRICAL
Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
13
Compact Fluorescent
PL-C 13W/4P
PL-C
G24q-1
18
Compact Fluorescent
PL-T 18W/4P
PL-T
GX24q-2
Lamp is included.
FINISH
Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.
WARRANTY
Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.
CERTIFICATION
Listed
for Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back