Wedge shaped housing is cast aluminum. Finned front cover is cast aluminum and mounts to housing with four socket head cap screws. Brushed stainless steel doorframe is secured to the housing with four captive socket head cap screws. Clear tempered glass lens is bonded to the doorframe for a weather tight seal. Housing is gasketed with one-piece closed cell silicone gaskets to provide a weather tight seal to the front cover and doorframe. Luminaire mounts to the wall surface over 3.5” or 4” octagon box with factory-supplied wall anchors. All hardware is stainless steel.

Lamp is housed within the specular hammertone reflector projecting light through clear tempered glass lens. Optional matte glass lens is available upon request. Luminaire may be mounted in direct or indirect position.

Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage and frequency of ±10%. Ballast shall be UL and CSA recognized. Lamp socket is 75w-600v rated.

Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.