Triangular slotted housing is one-piece cast aluminum. Molded translucent acrylic lens with matching contour nests within the housing. Housing is clip mounted to the cast aluminum back plate and secured with single recessed setscrew at the bottom of the housing. Lamp and electrical components are mounted to the back plate. One-piece closed cell silicone gasket bonded to the mounting plate provides a weather tight seal to the housing. Back plate mounts to the wall surface over 3.5” or 4” octagon box with factory-supplied wall anchors. All hardware is stainless steel.

Lamps are positioned within the translucent acrylic lens producing soft diffused illumination.

Compact fluorescent high frequency electronic ballast shall be Class P and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 90% and a minimum starting temperature of -20°F (-30°C) at nominal line voltage ±10%. Ballast shall be UL Listed. Lamp sockets are 75w-600v rated.

Housing is cleaned ultrasonically prior to painting. Standard finish is finely textured matte silver grey metallic. Special colors available on request.