Pole mounted luminaire
for outdoor applications where contemporary styling combined with
performance and ease of maintenance is desired.
HOUSING
One-piece die-cast
aluminum housing features integral compartment for reflector and electrical
components. Optical and electrical compartment is sealed to the lens
with one-piece profiled silicone gasket when closed. Frameless tempered
glass lens is secured with a single latch assembly, providing tool-less
access for relamping. Push button latch on the hinged reflector plate
allows tool-less access to the electrical components. Tray mounted
electrical components are removed by loosening two thumbscrews and
single electrical disconnect for ease of maintenance. Luminaire mounts
to 3” O.D. post-top and is secured with two setscrews. Luminaire
tilt angle may be adjusted from 0° to 15° in five degree increments.
All hardware is stainless steel.
OPTICS
Horizontal lamp
is positioned in the hydroformed facetted aluminum reflector with
specular anodized finish. Clear tempered frameless glass lens with
decorative masking shall be free of sharp edges.
ELECTRICAL
Metal halide core and coil ballast with class “H” (180°C)
insulation system shall have a minimum high power factor rating
of 90% and nominal ballast factor of 1.0. Ballast and igniter (where
applicable) combination shall be capable of reliable starting to
–20°F (-30°C) at nominal line voltage of ±10%.
Ballast, capacitor, and igniter are UL and CSA recognized. Medium
base porcelain socket is 660w-600v, 4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
175
MH
MH175/U/M
ED-17
Medium
150
MH
MHC150/C/U/M
ED-17
Medium
100
MH
MHC100/U/M
ED-17
Medium
70
MH
MHC70/U/M
ED-17
Medium
Lamp is included
POLE
Round tapered steel pole is manufactured from cold drawn over mandrel,
electric-weld, mechanical round steel tubing with nominal wall thickness
of 0.142”. Flush mounted handhole cover is plasma cut with
kerf not to exceed 1/8” and includes triangular tamper-resistant
locking device. Pole is hot-dip galvanized with coating inside and
out, then lightly sanded prior to painting. One-piece base cover
is 0.080” spun aluminum and finished to match the pole. Specify
15’ or 20’ nominal pole height. See pole data sheet for
mounting details.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte silver grey metallic, dark silver grey metallic, or graphite
grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back