LED pole mounted luminaire for pedestrian scale pathway and campus street lighting applications.
HOUSING
One-piece luminaire housing and fitter are die-cast aluminum. Housing includes compartment for LED optical system and driver. Hinged aluminum door frame with bonded UV-stabilized prismatic lens is sealed to the housing with one-piece profiled silicone gasket when closed and secured with a single latch assembly. Formed aluminum door latch is flush to the housing when closed and provides tool-less access to the field replaceable LED light engine and driver. Luminaire mounts to 3” O.D. tenon on bracket and is secured with two setscrews. Luminaire tilt angle may be adjusted from 0° to 15° in five degree increments. All hardware is stainless steel.
OPTICS
Two multi-chip LEDs mounted to a field replaceable module are positioned within the focal point of the spun aluminum anodized reflector with sandblasted finish. Specially designed prismatic lens is UV-stabilized polycarbonate with internal prisms and smooth exterior surface. Prisms minimize the visual brightness of the lens while producing a uniform asymmetric distribution pattern suitable for sidewalks and other long, narrow applications. Light engine can be replaced by removing three screws and disengaging the electrical disconnect for easy maintenance and future upgrades as technology advances.
ELECTRICAL
Total power consumption is 39 watts. at 700 mA. Universal voltage driver accepts 100v-265v AC input, 50/60Hz.
LAMPING
Wattage(LED)
Source
Color Temperature
Delivered Lumens
34
2 x multi-chip LEDs
5600K
1380 lms
LEDs are included
POLE
Fabricated aluminum bracket assembly is composed of two side sections welded to horizontal plate and slipfitter. Integral
slipfitter has two rows of three recessed stainless steel setscrews
for mounting to 3” O.D. pole and has built-in stop to limit
insertion depth to 4.5”.
Round tapered pole is available in steel or aluminum.
Steel pole is manufactured from cold drawn over mandrel,
electric-weld, mechanical round steel tubing with nominal wall thickness
of 0.142”. Flush mounted handhole cover is plasma cut with
kerf not to exceed 1/8” and includes triangular tamper-resistant
locking device. Pole is hot-dip galvanized with coating inside and
out, then lightly sanded prior to painting. One-piece base cover
is 0.080” spun aluminum and finished to match the pole. Nominal pole height is
15’.
Contact factory for aluminum pole offerings.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte silver grey metallic, dark silver grey metallic, or graphite
grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back