Wall mounted luminaire
for outdoor applications where contemporary styling combined with
performance and ease of maintenance is desired.
HOUSING
One-piece die-cast
aluminum housing features integral compartment for reflector and electrical
components. Optical and electrical compartment is sealed to the lens
with one-piece profiled silicone gasket when closed. Frameless tempered
glass lens is secured with a single latch assembly, providing tool-less
access for relamping. Push button latch on the hinged reflector plate
allows tool-less access to the electrical components. Tray mounted
electrical components are removed by loosening two thumbscrews and
single electrical disconnect for ease of maintenance. Luminaire mounts
to 3” O.D. tenon on bracket and is secured with two setscrews.
Luminaire tilt angle may be adjusted from 0° to 15° in five
degree increments. All hardware is stainless steel.
OPTICS
Horizontal lamp
is positioned in the hydroformed facetted aluminum reflector with
specular anodized finish. Clear tempered frameless glass lens with
decorative masking shall be free of sharp edges.
ELECTRICAL
Metal halide core
and coil ballast with class “H” (180°C) insulation system
shall have a minimum high power factor rating of 90% and nominal ballast
factor of 1.0. Ballast and igniter combination
shall be capable of reliable starting to –20°F (-30°C)
at nominal line voltage of ±10%. Ballast, capacitor, and igniter
are UL and CSA recognized. Medium base porcelain socket is 660w-600v,
4kV pulse rated.
LAMPING
Wattage
Source
Lamp
Bulb
Base
150
MH
MHC150/U/M
ED-17
Medium
100
MH
MHC100/U/M
ED-17
Medium
70
MH
MHC70/U/M
ED-17
Medium
Lamp is included
MOUNTING
Fabricated steel bracket assembly is composed of two steel plate
side sections welded to horizontal steel section and wall mounting
plate. Bracket assembly mounts over junction box and is secured
to wall in four places. Bracket is hot-dip galvanized inside and
out, then lightly sanded prior to painting.
FINISH
Housing is ultrasonically
cleaned prior to painting. Standard finish is finely textured matte silver grey metallic, dark silver grey metallic, or graphite
grey. Special colors available on request.
WARRANTY
Limited product
warranty period is three years. Lamps and ballasts shall carry the
respective manufacturer's limited warranty.
CERTIFICATION
Listed for
Wet Locations.
Specifications are subject to change without notification
Save
Add product
Send
Print
Back