Illuminating column for applications where contemporary styling and colored accenting is desired.

Cylindrical base with horizontal cut at top of shaft is constructed from 0.157” nominal wall, 6061-T6 aluminum tubing.. Handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Cylindrical lens is impact-resistant matte acrylic and enclosed at the bottom with an alignment plate assembly. Assembly positions the bottom mounted auxilliary reflector inside the lens to the bias cut of the base within the luminaire. Lens assembly is secured with stainless steel socket head cap screws from inside the base. Fabricated aluminum top cap houses the primary reflector and is gasketed to create a weather-tight seal to the lens. Top cap is secured to the lens with two socket head cap screws.

Twelve high-output LEDs fitted with narrow beam lenses project light upward to evenly illuminate the cylindrical matte acrylic lens. Top mounted reflector element contributes to the uniformity of illumination at the top of the lens.

Universal LED driver is mounted in a weather-proof enclosure at the base of the column and operates on 120v through 240v AC input, 50-60 Hz. LED driver supplies 350mA to LEDs. Maximum power consumption is 18 watts. Driver includes dimming control options for pre-programmed color changing sequencing or DMX control capability with optional interface. Contact factory for availability of 277v driver.

Luminaire mounts to wall in four places with hardware provided by others.

Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.

Limited product warranty period is three years. LEDs and driver shall carry the respective manufacturer’s limited warranty.