Illuminating column for applications where contemporary styling is desired.

Cylindrical base with bias cut at top of shaft is constructed from 0.157” nominal wall, 6061-T6 aluminum tubing. Handhole cover is plasma cut with kerf not to exceed 1/8” and includes triangular tamper-resistant locking device. Cylindrical lens is impact-resistant matte acrylic and enclosed at the bottom with an alignment plate assembly. Assembly positions the bottom mounted auxilliary reflector inside the lens to the bias cut of the base within the luminaire. Lens assembly is secured with stainless steel socket head cap screws from inside the base. Fabricated aluminum top cap houses the primary reflector and is gasketed to create a weather-tight seal to the lens. Top cap is secured to the lens with two socket head cap screws.

Top mounted narrow beam reflector is facetted and constructed of specular anodized aluminum to project light onto the bottom mounted hammertone auxiliary reflector producing soft diffused illumination.

Electronic ballast shall be Sound Rated A and Outdoor Type 1 rated. Ballast shall have a minimum high power factor rating of 97% and nominal ballast factor of 0.99. Total harmonic distortion shall be less than 10%. Ballast shall be capable of reliable starting to -20°F (-30°C) at nominal line voltage. Ballast is UL and CSA recognized. G12 base porcelain socket is 660w-600v, 4kV pulse rated.

Luminaire mounts to wall in four places with hardware provided by others.

Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.

Limited product warranty period is three years. Lamp and ballast shall carry the respective manufacturer’s limited warranty.