Illuminated bollard provides colored accenting where contemporary styling and a visual statement are desired.
HOUSING
Cylindrical base with bias cut at top of shaft is constructed from 0.157” nominal wall, 6061-T6 aluminum tubing. Cylindrical lens is impact-resistant matte acrylic. LEDs and driver are mounted in the shaft at the bottom of the lens. Lens assembly is secured with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed setscrews. All hardware is stainless steel.
OPTICS
Twelve high-output LEDs fitted with narrow beam lenses project light upward to evenly illuminate the cylindrical matte acrylic lens. Top mounted reflector element contributes to the uniformity of illumination at the top of the lens.
ELECTRICAL
Universal LED driver is mounted in a weather-proof enclosure at the base of the column and operates on 120v through 277v AC input, 50-60 Hz. LED driver supplies 350mA to LEDs. Maximum power consumption is 18 watts. Driver includes dimming control options for DMX & DALI control capability.
LAMPING
# LEDs
Available colors
12 high-power LEDs
RGB
LEDs are included.
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of HessAmerica. Consult factory for more current technical data.
MOUNTING
Internal mounting cup mounts to four 1/2" x 17" x 4" hot-dip galvanized anchor bolts embedded in a concrete foundation provided by others. Bollard installs onto mounting cup and is secured with recessed stainless steel setscrews, providing a flangeless appearance. Mounting cup allows horizontal orientation of the bollard independent of the installed bolt pattern.
FINISH
Standard finish is finely textured matte silver grey metallic or graphite grey. Special colors available on request.
WARRANTY
Limited product warranty period including LEDs is three years. Driver shall carry the manufacturer’s limited warranty.
CERTIFICATION
Listed for Wet Locations.
Specifications are subject to change without notification